Air Compressor For Fire Sprinkler System

Air Compressor For Fire Sprinkler System FAQ

What type of pipe should i use for my air compressor?

Galvanized Pipe. Galvanized piping is commonly used for water distribution and for general plumbing. Galvanized coating resists moisture in compressed air but pieces of the coating will flake off and end up in your tools. The debris will cause severe damage to cylinders, pneumatic tools, and other components.

What are the requirements for a fire sprinkler system?

Fire Sprinkler System Requirements. A canopy covering a door that is required to be marked as an exit shall be required to have fire sprinklers installed outside that door if the canopy extends more than 4 feet out from the door and is 12 feet or less in height fro the ground regardless if the canopy is combustible or non combustible.

What is psi in air compressor?

Helpful Air Compressor Definitions Pounds per Square Inch (PSI) — the measurement of air pressure and force that is delivered by an air compressor. Pounds per Square Inch Gauge (PSIG) — the measurement of air pressure and force that is delivered by an air compressor relative to our atmospheric pressure at sea level, which is 14.7 PSI.

What are the parts of an air compressor?

Air compressor parts are also similar to a small gas engine. They consist of a piston, connecting rod, crankshaft, cylinder, and valve head. The air is compressed in the following manner: The valve head at the top of the compressor tank draws air in by the downward movement of the piston in the cylinder.