Bendix 921 Air Compressor Parts

Bendix 921 Air Compressor Parts FAQ

How do you install a bendix compressor?

Bendix®Compressors: Park vehicle, chock wheels, and follow all standard safety procedures. Remove the governor and install a fi tting to the unloader port. Add a section of air hose (min 1 ft long for a 1/2" diameter line) and a gauge to the fi tting followed by a shut-off valve and an air source (shop air or small air tank).

Where is the discharge port on a bendix ba921 series air compressor?

This Bendix BA921 Series Air Compressor is a single cylinder, single stage compressor with a rated displacement output of 15.8 CFM at 1250 RPM. It's designed for flange mounting. The inlet port is located on the top of the compressor, while the discharge port is located on the side of the compressor.

What type of reciprocating compressor is a bendix?

The Bendix®BA-921 compressor is a single-cylinder reciprocating compressor with a rated displacement of 15.8 cubic feet per minute at 1250 RPM. The compressor consists of a water-cooled cylinder head assembly and an integral air-cooled crankcase assembly.

What is a safety valve on a bendix compressor?

All Bendix®BA-921 compressors are equipped with a safety valve to protect the compressor head in the event of, for example, a discharge line blockage downstream of the compressor. Excessive air pressure will cause the safety valve to unseat, release air pressure and give an audible alert to the operator.