Mh Level Converter

Mh Level Converter FAQ

How do you convert from h to mh?

You can do the reverse unit conversion from H to mH, or enter any two units below: The SI prefix "milli" represents a factor of 10 -3, or in exponential notation, 1E-3. So 1 millihenry = 10 -3 henries. The definition of a henry is as follows: The henry (symbol: H) is the SI unit of inductance.

How to use a level converter?

The level converter is very easy to use. The board needs to be powered from the two voltages sources (high voltage and low voltage) that your system is using. High voltage (5V for example) to the 'HV' pin, low voltage (3.3V for example) to 'LV', and ground from the system to the 'GND' pin.

What is a multi level converter?

Unlike two level converters which use series connected devices to increase voltage rating, the multi-level converter employs dynamic voltage sharing clamping diodes and/or capacitors built into the converter structure so as to reduce the numbers of series connected devices required.

Can a logic level converter convert 12v to 5v?

Doing a quick test and measuring with a multimeter, the logic level converter was able to convert logic between 12V & 5V and vice versa. The logic level converter was also tested between 15V & 5V and 15V & 3.3V without any issues.