T1 Media Converter

T1 /E1 Copper-to-Fiber Media Converters . The FlexPoint T1 /E1 media converter provides standard T1 (1.544Mbps) or E1 (2.048Mbps) copper to fiber conversion and can be used to extend the demarcation point between service provider and networking equipment. T1 /E1 media converters operate in pairs, providing distance extension over fiber.

https://dev.omnitron-systems.com/index.php/flexpoint-t1-media-converter.php

RDDRONE-T1ADAPT 100BASE- T1 to 100BASE-TX media converter 4 Overview of the RDDRONE-T1ADAPT media converter The RDDRONE-T1ADAPT Ethernet adapter board is an evaluation platform for automotive two-wire Ethernet (100BASE- T1 ). It can be used to connect a standard Ethernet device, such as a PC or single-board computer, to a peripheral device with a

https://www.nxp.com/docs/en/user-guide/UM11602.pdf

Buy the RAD-Moon 2. Intrepid’s RAD-Moon 2 is the most advanced Ethernet Media Converter for Automotive Ethernet applications. Using the RAD-Moon 2, you can convert from 100BASE- T1 Ethernet to 100BASE-TX or 1000BASE- T1 to 1000BASE-TX. This is useful for connecting a PC to a 100/1000BASE- T1 host or switch. The RAD-Moon 2 provides a small but

https://intrepidcs.com/products/automotive-ethernet-tools/rad-moon2/

The converter also supports AMI, B8ZS and HDB3 line codes. Manual switch settings with on-the-label descriptions enable easy configuration of T1 /E1 line codes and line lengths. The FlexPoint T1 /E1 is a modular copper-to-fiber media converter that supports ANSI, AT&T, ITU and ETSI standards

https://www.graybar.com/store/en/gb/4470-1-25888652

Intrepid’s RAD-Moon 2 is the most advanced Ethernet Media Converter for Automotive Ethernet applications. Using the RAD Moon 2, you can convert from 100BASE- T1 Ethernet to 100BASE-TX or 1000BASE- T1 to 1000BASE-TX. The RADmoon 2 is useful for connecting a PC to a 100/1000BASE- T1 host or switch.

https://neocartools.com/product/rad-moon-2

Physical Layer: 1000/100 Base- T1 Automotive Ethernet Connector type: RJ45 socket with status LEDs Pin Automotive Ethernet 1 TRx+ 2 TRx-3 Not used 4 Not used 5 Not used 6 Not used 7 Not used 8 Not used Shield Ground Table 2.4 Pinout Socket "Automotive Ethernet" An adapter cable from RJ45 to D-Sub 9-pin is included. D-Sub RJ45

http://www.shzongkun.com/Uploads/file/Goepel-CPSC/EasyCON2_manual_V1-1-6.pdf

Description. The 100BASE- T1 MediaConverter BCM establishes one direct point-to-point conversion between automotive ECU’s using 100BASE- T1 and any standard Fast Ethernet device with RJ-45 connector. No packets are stored or modified. First on the market and highest proven reliability. It uses the Broadcom BCM89810 PHY. 100BASE- T1 MediaConverter BCM is the ...

https://www.nextgigsystems.com/new/technica-engineering/100base-t1-mediaconverter-bcm/