Torco Torque Converter California

Torco Torque Converter California FAQ

How do you install a torque converter?

First, hold the torque converter horizontally and face down (bolt holes facing towards the ground) so that the fluid will not drain back out.When ready to insert on the input shaft, turn the converter vertically with the bolt holes facing towards you. ...Continue to gently push on the torque converter and slowly rotate it back and forth. ...More items...

What are the components of a torque converter?

What’s Inside a Torque Converter?Impeller. The impeller, sometimes known as a pump, is attached to and spins with the engine’s crankshaft. ...Turbine. When the fluid hits the turbine’s blades, the turbine spins and funnels the fluid to the center of the turbine and back across toward the stator and impeller.Stator. ...Clutch

Should you change the torque converter with the transmission?

Yes you fill the torque converter then install it on the trans this is to ensure that the trans pump is primed during start up.

How to remove torque converter from transmission?

How do You Check a Torque Converter?Turn on the ignition key to start the engineWait for 5 to 10 minutes till the engine warms upGently press the accelerator twiceRev up the engineWait for the engine to return to its idle statePress the brake pedal and shift into drive